Viper 3.83.17 Curious

[«ººÐè©èÞ†âkóñ™]

I'm pleased with the new setup but unsure what the extra two boxes were put in for. The subinfo and user roll wont save in the two extra boxes. I still use the vGrabber to get all the info anyway.

Silly me, I thought it was a new setup so maybe I could have two Viper's in the room, till I saw it over write 16j

Oh well, I did have an initial problem with Viper starting and connecting but managed to sort it out ;D

I have made sure all the response, onjoin etc are working as they were.
I would be interested to hear how others are getting on with the two extra boxes, and whether you are able to save the info for them.

Laterz...............

[Armstrong]

how much time does it take for userole and subscriberinfo to expire?

[«ººÐè©èÞ†âkóñ™]

Hello JJ, where I am in New Zealand, most times I must get new info about midnight. So usually my passport info expires between 8 to 12 hrs after getting it.

Oh by the way Webby, if its not too troublesome, in the next update to vGrabber, can you change the Grabber url from this:
chat.msn.com/chatroom.msnw?rm=Welcome_CA&pgmarket=en-us

to this:
chat.msn.com/chatroom.msnw?rm=Welcome_CA&pgmarket=en-us&pps=k

I ask because I'm in New Zealand and uh ummm........MSN Chats are closed here. It is annoying to have to change the url everytime I update my passport ;D

If you can't then sweet azzz, I will not die, lol ;D ;D

Tnx...........Laterz

[Armstrong]

It saves the passport info, but userrole, i think, expires in 5 min. Not sure about subscribersinfo

[«ººÐè©èÞ†âkóñ™]

Could be why its not saving.
I'm not sure either how long it lasts, If I get the subinfo I can rejoin hrs later, and I think its the same with groups join.
As long as the info is still current, Viper will join as many times as the info is still current.

[X]

I get cant be authenticated by chat if i hit retry i get cant connect to server 2 .... when i run the vd it says my connection dll isnt uptodate but it is so i replaced the 16j till it gets worked out or i see what i have done wrong ...... X

[Armstrong]

Viper doesn't save subscriberinfo and userrole. They were only valid for 5min last time I tested userrole. It wasn't worth the trouble. But if it works 12hrs or you like it that way than I'll save them to ini file in the next version.

[Armstrong]

when i run the vd it says my connection dll isnt uptodate

that means the latest version is not registered. Right click and click register. But make sure it is a latest one and the right type.

confusion between msnchat and group chats dll is another common problem.

[Tester007]

Checking version info of MSNConnectionVProxy dll...
Warning: You are using outdated version of viper connection dll. Use the latest version.
Version info of current Viper Connection dll in use:
Type: dummydll
Version: 1.0.0
Path: C:\Program Files\ViperBot\vsys\vconnection\MSNConnectionVProxy.dll
Latest version available for the Viper Connection dll in use:
Type: msnchat
Version: 1.5.0.0
Comments:
Download URL: www.webagent007.org/viper/connection/msnchat/msnconnectionvproxy.dll
Version info for latest Viper Connection dll available for download:
Type: msngroups
Version: 1.1.0.0
Comments:
Download URL: www.webagent007.org/viper/connection/msngroup/msnconnectionvproxy.dll


in running 1.5.0.0 the latest provided from above url yet i still get the same warning from VD connects just fine tho

just wondering why is says its outdated if in fact its the latest dll

[«ººÐè©èÞ†âkóñ™]

I get the same as well tester, however I just ignore it. I know I'm using the latest MSN Chat.dll ;D

Mine works great
Yup JJ I still like it the way it is.

[Webagent007]

I think I dont like .msi installs but I seem to be the only one with installation trouble like:

Event Type: Error
Event Source: MsiInstaller
Event Category: None
Event ID: 11906
Date: 6/9/2004
Time: 10:13:34 PM
User: N/A
Computer: HOST
Description:
Product: ViperBot -- Error 1906. Failed to cache package C:\WINDOWS\Installer\3ac4c702.msi. Error: -2147286775. Contact your support personnel.

For more information, see Help and Support Center at go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 42 37 34 32 38 31 30 {B742810
0008: 39 2d 42 39 35 35 2d 34 9-B955-4
0010: 43 35 44 2d 39 31 41 35 C5D-91A5
0018: 2d 46 37 43 36 34 46 31 -F7C64F1
0020: 46 32 30 42 44 7d F20BD}

on aswell my pc and my laptop! but I managed to get it working on my pc by starting the Windows Installer service, however that did not work for my laptop. Doest matter for the laptop though I dont use Viper on it anyways.

I will update the dll's if I had a chance to play with IViperObject in Addonengine, so then the message saying the dll is outdated will be gone too.. I hope because I also get:

Checking version info of MSNConnectionVProxy dll...
Warning: Viper connection dll not in 'C:\Program Files\ViperBot\vconnection' folder.
Version info of current Viper Connection dll in use:
Type: msnchat
Version: 1.5.0
Path: C:\Program Files\ViperBot\vconnection\MSNConnectionVProxy.dll
Latest version available for the Viper Connection dll in use:
Type: msnchat
Version: 1.5.0
Comments:
Download URL: www.webagent007.org/viper/connection/msnchat/msnconnectionvproxy.dll
Version info for latest Viper Connection dll available for download:
Type: msngroups
Version: 1.1.0
Comments:
Download URL: www.webagent007.org/viper/connection/msngroup/msnconnectionvproxy.dll

I have a test dll here www.webagent007.org/viper/test/MSNConnectionVProxy.dll wich will return:


Option Explicit

Public Function getPath() As String
   getPath = App.Path & "\" & App.EXEName & ".dll"
End Function

Public Function getVersion() As String
   With App
       getVersion = .Major & "." & .Minor & "." & .Revision
   End With
End Function

Public Function getType() As String
   getType = "msnchat"
End Function

Am I still on an older version of Viper Diagnostic tool?

[«ººÐè©èÞ†âkóñ™]

I have noticed one thing.

Warning: Viper connection dll not in 'C:\Program Files\ViperBot\vconnection' folder.

There is no vconnection folder in Viperbot.
Shouldn't it be:

C:\Program Files\Viperbot\Viper 3.83\Inaddon\MSNConnectionVProxy.dll

To me Viper can't find it cos the "vconnection" folder does not exist
Least thats what I see

[«ººÐè©èÞ†âkóñ™]

By the way webby, your test dll really works gr8.
I did post the info here but it made the window go sooooo wide, lol so I deleted it.

I hope what I posted just b4 this one helps a little. I too had an initial problem with connecting but managed to clear it up.


Laterz.............

[Armstrong]

"Warning: Viper connection dll not in 'C:\Program Files\ViperBot\vconnection' folder. "

It means that the dll should be in vconnection folder.

it is supposed to check in 'C:\Program Files\ViperBot\vsys\vconnection'; it is a mistake in VD so just ignore it untill the next update.

"Product: ViperBot -- Error 1906. Failed to cache package C:\WINDOWS\Installer\3ac4c702.msi. Error: -2147286775. Contact your support personnel."

I'm not sure about this error, but I can give you an exe setup.

[JP]

My Viper wasn't working with the last conection-dll (1.5.0.0). I have created a folder in c:\Program Files\ViperBot\vsys\vconnection' and put dll conection there and it has started working properly.

JP